Description
Feature
High-rigidity virtual axis structure, the Y-axis movement is composed of a medium pallet with an inclination angle and a large horizontal pallet.
The motion trajectory is continuously interpolated between the two axes, which is close to the extreme rigid milling state.
Integrated power turret structure, and the high-precision three-pieces end scale clutch is positioned to ensure positioning accuracy, repeat positioning accuracy and clamping rigidity.
High-rigidity and high-torque synchronous motorized spindle, the spindle cooling adopts an integrated cooling system of liquid cooling and air cooling.
Ensure the working temperature of the spindle motor to ensure the service life and machining accuracy of the spindle.
Servo programmable tailstock, equipped with overload protection program.
The movement and jacking of the tailstock are driven by the servo motor, thereby improving the processing efficiency.
Technical Parameters
|
Configuration |
HCNT X-200S |
||
|
Machining Capacity |
Maximum Swing Over Bed |
ø/mm |
560 |
|
Maximum Swing Over Slide |
ø/mm |
300 |
|
|
Maximum Machining Length |
mm |
620 |
|
|
Maximum Diameter of Bar |
ø/mm |
52 |
|
|
Maximum Machining Diameter ø/mm |
350 |
||
|
|
Spindle Head Type |
GB59001 |
A2-6 |
|
|
Spindle Taper Hole |
mm |
62 |
|
Permanent |
Spindle Speed Range |
rpm |
50-4000 |
|
Magnet |
|||
|
Spindle Shift Mode |
Servo |
||
|
Synchronous |
|||
|
Motorized |
|||
|
Spindle Output Torque |
N·m |
180 |
|
|
Spindle |
|||
|
Chuck Type |
Hydraulic Through Chuck |
||
|
|
Chuck Size |
Inch |
8" |
|
Feed Rate
Feed Rate |
Rapid Traverse Speed On X-axis |
m/min |
30 |
|
Rapid Traverse Speed On Y-axis |
m/min |
10 |
|
|
Rapid Traverse Speed On Z-axis |
m/min |
30 |
|
|
Rapid Traverse Speed On Z1-axis |
m/min |
25 |
|
|
Servo Motor Torque On X-axis |
N·m |
15 |
|
|
Servo Motor Torque On Y-axis |
N·m |
15 |
|
|
Servo Motor Torque On Z-axis |
N·m |
15 |
|
|
Servo Motor Torque On Z1-axis |
N·m |
6 |
|
|
X-axis Travel |
mm |
180 |
|
|
Y-axis Travel |
mm |
±50 |
|
|
Z-axis Travel |
mm |
620 |
|
|
Z1-axis Travel |
mm |
620 |
|
|
Guideway Type |
Linear Guideway |
||
|
Turret |
Turret Type |
12 Post Live Tool Turret(BMT55) |
|
|
Tool Size |
mm S |
25*25/ø40 |
|
|
Tool Change Time S |
0.2(Nearby Tools,hydraulic clamp/unclamp time not included) |
||
|
Milling Spindle |
Max Spindle Speed |
4500 |
|
|
Tool Size |
ER32 |
||
|
Tailstock |
Tailstock Type |
Servo Programmable |
|
|
Internal Taper of Tailstock Sleeve |
MT5 |
||
|
Tailstock Travel |
mm |
620 |
|
|
Power Source |
Total Rated Power |
KVA |
43 |
|
Total Rated Current |
A |
95 |
|
|
Dimension |
Machine Weight |
kg |
4800 |
|
Machine Dimension L*W*H(mm) |
2790X1900X1940 |
||
|
Optional |
Chip Conveyor |
Hinge-Belt |
|
